Site Explorer

Site Explorer

Atellica Solution Immunoassay & Clinical Chemistry Analysers

Engineered to deliver control and simplicity so you can focus on driving better outcomes

With up to 10 components that can be combined into more than 300 customisable configurations including linear, L, and U shapes, the Atellica™ Solution easily adapts to changing testing needs and space requirements and can operate as a stand-alone system or connect to Aptio® Automation to provide a multidisciplinary total lab solution.

Atellica™ CH 930 Analyser

Atellica Chemistry Analyser

  • Clinical chemistry analyser that runs up to 1800 tests per hour
      • Photometric: 1200 tests per hour
      • Integrated multisensor technology (IMT): 600 tests per hour
  • Onboard capacity: 70 assays (67 reagent positions and three IMTs)
  • Sample management via Atellica™ Sample Handler or Atellica™ Direct Load
  • Up to six Atellica CH 930 Analysers can be connected to accommodate chemistry testing volume


Atellica™ IM 1300 Analyser (mid-volume), Atellica™ IM 1600 Analyser (high-volume)

Atellica Immunoassay Analyser

  • Mid-volume and high-volume options in the same footprint
       • Atellica IM 1300 Analyser: up to 220 tests per hour*
       • Atellica IM 1600 Analyser: up to 440 tests per hour*
  • Proven acridinium ester (AE) technology
  • 42 primary assay positions, 35 ancillary reagent positions
  • Sample management via Atellica™ Sample Handler or Atellica™ Direct Load
  • Up to three Atellica IM analysers can be connected to the Atellica™ Sample Handler to accommodate immunoassay testing volume


Atellica™ Sample Handler

Atellica SampleHandler
  • High-capacity sample-processing component that sets the new standard in sample management
  • >30 different sample container types accommodated
  • Capacity: 440 tubes
  • Throughput: 500 tubes per hour
  • Multi-camera vision system with 360º view
  • Automatic quality control and calibration
      • 60 controls and calibrators stored in an onboard, covered, refrigerated compartment and
         shared by all connected analysers
      • Automated scheduling and delivery
  • Up to three Atellica Sample Handlers can be integrated with up to seven Atellica™ IM and CH analysers


Atellica™ Direct Load

Atellica Direct Load
  • Sample processing component for a single Atellica™ CH or IM analyser
  • Capacity: 60 tubes
  • Throughput: 250 tubes per hour
  • Can be connected to Aptio® Automation via the Atellica™ Direct Connect


*Dependent upon test mix.
Under development. Not available for sale.
Aptio Automation is manufactured by Inpeco and is exclusively distributed by Siemens Healthcare Diagnostics Inc. Aptio is a trademark of Siemens Healthcare Diagnostics Inc. Inpeco is a trademark of Inpeco SA.

Did this information help you ?
Thank you for your response
We detected numbers and/or an '@' symbol in your comment. Are you trying to enter a phone number or email address so that we may contact you, please contact us via our email form instead.

Note: to get a direct personal response, please contact us via our email form.

Thank you